To order and for more information call 717.645.4358
AMSOIL is the best synthetic oil on the market!! Due to
growing popularity and need, AMSOIL is looking for individuals interested
in a part or full time dealership that can even be run as a home-based
business.
This is not a get Rich Quick Scheme as it requires time
and effort on your part.
Be a part of a multi-billion dollar industry and become
a dealer today!
FREE CATALOG
www.raceshopper.com
www.changing-gears.com
www.autoseatcover.biz
|
|
DOMINATOR
Synthetic 2-Cycle Racing Oil
|
|
New AMSOIL DOMINATOR Synthetic 2-Cycle Racing
Oil is a robust formulation specially engineered for unsurpassed
protection in high performance two-cycle motors, both
on and off the track. It contains heavier synthetic base
oils that provide more lubricity for "on the edge" operation.
DOMINATOR reduces friction and protects pistons and bearings
subjected to the rigors of racing. DOMINATOR contains
the right additives for clean motor operation.
- Provides excellent film strength
for high heat, high RPM motors
- Reduces friction for maximum power
- Recommended for use with coated
or non-coated racing pistons
- Recommended for use with exhaust
power valves
- Recommended for use with high octane
racing gas
- Burns clean; Prevents ring sticking
and plug fouling
- Provides excellent protection at
50:1 pre-mix or in injection system
|
|
DOMINATOR, an AMSOIL exclusive formulation,
lubricates and protects high performance two-cycle motors,
both on and off the track. High performance motors, particularly
those that are modified, operate hotter and at higher RPMs
than recreational motors, and they need good oil for peak
performance. DOMINATOR is engineered for racing. It has
the right film strength and clean burning properties for
"on the edge" operation.
Super Film Strength
High performance two-cycle motors have high compression
ratios, which significantly increase combustion chamber
heat and crankshaft bearing pressures. Hot combustion
processes quickly burn off and evaporate light oils and
cause rapid piston expansion, decreasing piston-to-cylinder
wall clearances. This promotes piston scuffing and possible
seizure. And increased pressure on crankshaft bearings
promotes metal-to-metal contact, wear and pitting.
High heat and pressures require tough oil with
better film strength and more lubricity. DOMINATOR, constructed
with AMSOIL heavy synthetic oil, handles high heat better
than mineral oils and provides improved film strength
and lubricity. DOMINATOR reduces friction and provides
an extra measure of protection against piston scuffing
and crankshaft bearing wear.
Clean Burning
High combustion processes require the proper additives
and oils to control deposits. DOMINATOR contains strong,
high temperature detergent additives and highly pure AMSOIL
synthetic oil. It prevents deposits that cause ring sticking,
plug fouling and exhaust port blocking. DOMINATOR is an
optimized product for severe service.
Applications
DOMINATOR is recommended for use in high performance stock
or modified two-cycle motors, including air or liquid
cooled snowmobiles, personal watercraft, motorcycles (Moto
X), ATVs, go-carts and outboard motors*. Good for use
with coated or non-coated pistons, high-octane racing
fuels and exhaust power valves. Compatible with most other
two-cycle oils, however, mixing oils should be minimized.
Use at 50:1 pre-mix ratios (2.6 oz. oil per
U.S. gallon of gas) or as injection oil where JASO FC
or API TC oils are specified. Not suitable for use with
alcohol or nitro-methane fuels.
* Not suitable for long-term use in outboard
motors as a TC-W3 type oil, although excellent as a race
oil for short-term use where motors are periodically inspected.
|
TYPICAL TECHNICAL PROPERTIES
DOMINATOR Synthetic 2-Cycle Racing Oil
|
Kinematic Viscosity @ 100°C,
cSt (ASTM D-445)
|
7.6 |
Kinematic Viscosity @ 40°C,
cSt (ASTM D-445)
|
40.9 |
Viscosity Index (ASTM D-2270) |
156 |
Pour Point °C (°F) (ASTM
D 97)
|
-48 (-54) |
Flash Point °C (°F) (ASTM
D 92)
|
92 (198) |
Fire Point °C (°F) (ASTM D 92)
|
97 (207) |
DANGER: harmful or fatal if swallowed. Contains synthetic
lubricant and petroleum distillates. If swallowed do not
induce vomiting. Contact a physician immediately. Keep away
from fire, heat and open flame. Use with adequate ventilation.
Avoid frequent or prolonged skin contact. Flush eyes with
water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN. |
|
|
[ HOME]
[ AUTO PARTS STORE ]
[ MOTOR OILS ]
[ GEAR LUBE ]
[ TRANSMISION FLUID ]
[ 2-CYCLE OIL ]
[ GREASES ]
[ OIL FILTERS ]
[ AIR FILTERS ]
[ HYDRAULIC ]
[ COMPRESSOR OIL ]
[ FUEL ADDITIVES ]
[ CAR CARE ]
[ FREE CATALOG ]
[ DONALSON FILTERS ]
[ MOTHRES- POLISHES WAXES CLEANERS ]
[ RACING ]
[ WARRANTY ]
[ ORDER ]
|
For more infomation call 717-645-4358
|
Testimonials
|
Peter Virgona of Merrick, NY is a self-proclaimed oil enthusiast.
“I do a great deal of reading and research, always looking for the best oil,”
Virgona said. “The more I read the more I realized AMSOIL was the best ‘true’
synthetic I could buy. After using Mobil 1 since 1986, I made the switch to
AMSOIL.”
Virgona drives a 1999 Ford Crown Victoria with nearly 98,000 miles on the engine.
He switched from Mobil 1 to AMSOIL 5W-30 Synthetic Motor Oil.
“The difference was immediate and signifi - cant,” Virgona said. “The idle
became much smoother. There are times I can’t tell if the car is running. It
also became much more responsive to the gas pedal, so much more responsive my
wife asked me what I did to the car.”
He has owned the car for almost nine years. “Not surprisingly, the gas mileage
improved signifi cantly,” he said. “This car always averaged 15 mpg going back
and forth from work. It now averages 16.5 mpg. That’s a 10 percent increase.
I truly didn’t expect such a big change.”
He waited to report his fi ndings until after he had driven the car at least
5,000 miles “to confi rm that the numbers are average and not just a fl uke.”
Virgona also installed AMSOIL 5W-30 in his sister-in-law’s 1996 Dodge Caravan
with a 3.0 litre V6 engine. She had always used conventional motor oil with
regular oil changes every 3,000 miles, Virgona said.
“Nonetheless, she had a signifi cant amount of sludge that was obvious under
the oil cap,” he said. “She also experienced a very loud lifter noise that would
come and go with the engine either hot or cold. Presumably the sludge was affecting
the oil circulation to the lifters.”
Oil consumption in the van was increasing, using about one quart every 1,500
to 2,000 miles.
“I switched her to AMSOIL and put in a new fi lter,” Virgona said. “Within
1,000 miles the lifter noise was all but gone. By 3,000 miles, virtually all
the sludge was gone. I drained and refi lled the oil a second time with AMSOIL
5W-30. The oil consumption is now down to one quart every 3,000 miles, with
no more lifter noise. And, except for a little yellow varnish, all the sludge
is gone.
“I am very happy with AMSOIL and plan to use it from now on. I recommend it
to anyone who wants a great synthetic oil.”
Virgona just had a case shipped to his father-in-law in Florida because he
believes in AMSOIL products, he said, and wants others to experience their benefi
ts. In fact, he’s considering becoming a Dealer. The more I read the more I
realized AMSOIL was the best ‘true’ synthetic I could buy.
|
|
|
|
AMSOIL
Preferred Customer
The AMSOIL Preferred Customer Program benefits anyone who is interested
in purchasing, or has been purchasing $75-$100 of automotive parts/products or more
per year. Learn all the details on how you
can buy AMSOIL lubricants at wholesale prices.
AMSOIL Preferred Customers are able to buy AMSOIL, Donaldson, NGK,
Wix, Trico, Mothers and Twin Air products at wholesale prices. Become
a Preferred Customer today! |
NEWS |
AMSOIL Product
Catalog
Download the AMSOIL product catalog
Become an AMSOIL Preferred Customer today and save 25%-35% on all
your AMSOIL purchased |
NEWS |
Better Fuel Mileage
Better Fuel Economy
Fuel economy is becoming more important with each passing year. Gas and diesel prices keep rising, putting a major strain on businesses that rely on vehicles and heavy equipment in their daily operations. AMSOIL synthetic lubricants improve fuel economy by allowing moving parts to move more freely, using less energy and creating less friction than when conventional lubricants are used.
The use of AMSOIL synthetic motor oil, gear lubes and transmission fluids can have a profound impact on fuel economy. Industry tests demonstrate an average conservative decrease in fuel consumption by two to five percent by switching to synthetic lubricants. Many AMSOIL customers report even larger gains in fuel economy.
|
NEWS |
7.3L PowerStroke Air Induction System
AMSOIL now carries a retrofit air induction system kit for Ford truck owners
who operate their vehicles in dirty or dusty conditions. Biggest benefits include:
* Improved fuel economy
* Increased horsepower
* Greater filtering efficiency
* Greater filter capacity
Designed for Ford 250-550 pickup trucks built after January 1998 thru to the
2003 model year, this kit has great selling potential. More than one million
Ford 7.3L PowerStroke Diesel pickup trucks are on the road today! |
NEWS |
AMSOIL
Torque-Drive™
AMSOIL Torque-Drive™ is recommended as a direct replacement for
TranSynd® Synthetic ATF in heavy duty, on and off highway automatic
transmissions manufactured by Allison®, General Motors®, Ford®,
Voith® and ZF® or wherever the standards TES-295, C-4, Dexron® III,
Mercon® or TE-ML 14C are specified.
|
NEWS |
API
Comparative Motor Oil Testing
AMSOIL Synthetic 10W-30 Motor Oil (ATM) and 10 competing conventional
and synthetic 10W-30 motor oils were subjected to a series of API
motor oil tests.
Read
all about it (174kb PDF) |
NEWS |
AMSOIL Interceptor High
Performance Synthetic 2-Cycle Oil Eliminates hard carbon
deposits
Extends engine life
Reduces smoke Prevents plug fouling
Read
all about it |
NEWS |
Nothing is better
than Mobil 1 ........ WRONG!
AMSOIL outperforms Mobil 1!
Read all about
it |
NEWS |
Reduce Americas dependence on foreign oil!
AMSOIL synthetic motor oils are designed for extended drain intervals
and reduce the amount of oil used by as much as 80%. Fewer oil changes
means less oil used. Better fuel economy means less oil being imported. |
|